Strong-pools-and-spas The Antigua User Manual

OWNER’S MANUALP.O. Box 108Northumberland, PA 178571-800-STRONG-91-800-787-6649™2/15/06CAUTION:More than one GFCI used on the electrical circuit will r

8Display flashes “hot” (OVERHEAT)• This indicates that the heater body is over 112ºF. The system should be shut down in this state and will re-start a

9Spa MaintenanceThe maintenance and care of your spa is simple and easy to carry out, and if performed regu-larly as scheduled, problems will be minim

10CONCENTRATED CHLORINATING GRANULES - The minimum chlorine level in the spashould be at least 2PPM (parts per million). Chlorine level should be tes

11Directional Jet 2”Center PivotsDirectional Jet 3”Center PivotsTop Air Control Valve(Air Control Valve should be turned offwhen spa is not in use. Th

12WARRANTIESLIFETIME ON THE SHELLThe Antigua Spa is forge-cast from authentic granite resin and is warranted for the life ofthe spa to the original ow

13FOR YOUR RECORDS:For future use, it is advisable that you write down some information pertaining to the model ofthe spa you have purchased. If you a

RETAIN THIS BOOKLET FOR FUTURE REFERENCE:FOR ANY MISSING PARTS, PROBLEMS OR QUESTIONS CALL:MONDAY THROUGH FRIDAY 8:30 AM - 5:00 PM E.S.T.(570) 275-270

Table of ContentsIntroduction ...

IntroductionThe Antigua SpaPlease use this space to recordthe pertinent information aboutyour new spa here:Date of Purchase: ________/________/_______

2WARNING People with infectious diseases should not use a spa.The use of alcohol, drugs or medication before or during spa use may lead to uncon-scio

3Spa Location:Improper installation may result in equipment damage and will void the warranty. Your spamust be placed on a flat, level surface.The sp

4Electrical - General InstructionsConnections should be made using copper conductors only. The connecting wire and circuit breakersor fuses must be s

Control Panel Identification5JETS 1 Press the Jets1 key to activate the pump. The system will run for 30 minutes, atwhich time the system will automat

6Before starting up your spa, make sure you have read and understand all of the previousinstructions. Make sure the spa has been installed correctly,

7Changing Filter CyclesTroubleshooting*indicates qualified service technician recommendedHeat Mode 120V VersionIn LC ( Low Current ) Mode ( 120V versi